Manufactured housing design and construction will comply with construction and safety standards published by the Department of Housing and Urban Development pursuant to the requirements of the National Mobile Home and Safety Standards Act of 1974 and all manufactured homes will be subject to inspection by the Building Official.

All manufactured homes shall be set on a solid slab structure and/or 18" x 12" to 20" x 14" runners. Said slab or runners shall have a minimum thickness of six (6) inches of reinforced concrete. Additional rooms and enclosed porches shall be constructed on a solid slab with a minimum thickness of six (6) inches.

Tie-downs will be required and will be secured prior to occupancy. Tie-downs shall utilize metal anchors which are installed to a minimum depth of twenty-four (24) inches. Tie-down material shall consist of metal or fabric material (nylon, etc.) which has a minimum tensile strength of 1,000 psi.

Underpinning and skirting of like material and color or better is required and shall be installed and approved by the city prior to occupancy.

Accessory buildings will be either manufactured or constructed in accordance with city codes.

All manufactured homes and modular homes shall comply with all building regulations of the city and such regulations are hereby incorporated into this section.