M-1 LIGHT MANUFACTURING DISTRICT
The regulations set forth in this Article or set forth elsewhere in this Appendix A when referred to in this Article, are the district regulations for the M-1 light manufacturing district. The light manufacturing district regulations are intended to provide for manufacturing, industrial, administrative, research and related uses in areas where such uses will cause the least disruption of the residential character of the Village. Bulk and height regulations and specific standards will encourage clean and quiet operations which protect other uses and properties within the district as well as properties within adjacent districts in order to enhance real estate values throughout the Village. The M-1 light manufacturing district is designed to provide for industrial activities that do not create appreciable nuisance or hazards and that allow for a pleasant environment. Development within this district should be consistent with the locations and goals as provided for in the Village's Comprehensive Plan. (Ord. 03-1155, 3-18-2003)
The minimum lot area for lots in the M-1 district is forty thousand (40,000) square feet except:
Community center: 25,000
Planned unit developments: 3 acres
(Ord. 03-1155, 3-18-2003)
| Required yard (principal uses) | Front 30 feet | Side1 10 feet | Rear 30 feet | Transitional2 25 feet |
| Floor area ratio | Maximum of 2.0 for all uses | |||
| Lot coverage | Maximum of 90 percent (includes all impervious surfaces) | |||
| Building height | Maximum of 35 feet | |||
| Lot frontage | Minimum of 100 feet | |||
| Notes: 1 A 25 foot side yard is required if the side yard is adjacent to a residential use or a property designated for residential in the Comprehensive Plan. 2 Transitional yards are exclusive landscaped open space, free of any building or site improvements. See Chapter 10 of this Code for landscaping requirements. Transitional yards apply along any nonresidential property line adjoining a residential district or a property designated for residential in the Comprehensive Plan. | ||||
(Ord. 03-1155, 3-18-2003)
All planned unit developments are subject to the conditions and review as set forth in Article XVII of this Appendix A. All special uses are subject to the conditions and review as outlined in Article XVI of this Appendix A. All other developments within the M-1 District not subject to planned unit development or special use review procedures shall be subject to Architectural Commission site plan review as set forth in Chapter 4 of this Code. (Ord. 03-1155, 3-18-2003)
Proposed projects that represent a significant departure from the Comprehensive Plan may elect to submit for a preliminary project review, which is entirely elective. See Appendix D, Article I, "Fees", of this Code for the associated fee. (Ord. 09-1436, 12-7-2009)
M-1 LIGHT MANUFACTURING DISTRICT
The regulations set forth in this Article or set forth elsewhere in this Appendix A when referred to in this Article, are the district regulations for the M-1 light manufacturing district. The light manufacturing district regulations are intended to provide for manufacturing, industrial, administrative, research and related uses in areas where such uses will cause the least disruption of the residential character of the Village. Bulk and height regulations and specific standards will encourage clean and quiet operations which protect other uses and properties within the district as well as properties within adjacent districts in order to enhance real estate values throughout the Village. The M-1 light manufacturing district is designed to provide for industrial activities that do not create appreciable nuisance or hazards and that allow for a pleasant environment. Development within this district should be consistent with the locations and goals as provided for in the Village's Comprehensive Plan. (Ord. 03-1155, 3-18-2003)
The minimum lot area for lots in the M-1 district is forty thousand (40,000) square feet except:
Community center: 25,000
Planned unit developments: 3 acres
(Ord. 03-1155, 3-18-2003)
| Required yard (principal uses) | Front 30 feet | Side1 10 feet | Rear 30 feet | Transitional2 25 feet |
| Floor area ratio | Maximum of 2.0 for all uses | |||
| Lot coverage | Maximum of 90 percent (includes all impervious surfaces) | |||
| Building height | Maximum of 35 feet | |||
| Lot frontage | Minimum of 100 feet | |||
| Notes: 1 A 25 foot side yard is required if the side yard is adjacent to a residential use or a property designated for residential in the Comprehensive Plan. 2 Transitional yards are exclusive landscaped open space, free of any building or site improvements. See Chapter 10 of this Code for landscaping requirements. Transitional yards apply along any nonresidential property line adjoining a residential district or a property designated for residential in the Comprehensive Plan. | ||||
(Ord. 03-1155, 3-18-2003)
All planned unit developments are subject to the conditions and review as set forth in Article XVII of this Appendix A. All special uses are subject to the conditions and review as outlined in Article XVI of this Appendix A. All other developments within the M-1 District not subject to planned unit development or special use review procedures shall be subject to Architectural Commission site plan review as set forth in Chapter 4 of this Code. (Ord. 03-1155, 3-18-2003)
Proposed projects that represent a significant departure from the Comprehensive Plan may elect to submit for a preliminary project review, which is entirely elective. See Appendix D, Article I, "Fees", of this Code for the associated fee. (Ord. 09-1436, 12-7-2009)