The proposed site plan shall be drawn to a scale not less than one inch equals 20 feet.

There shall be a key map showing the location of the subject property with reference to surrounding areas and existing street intersections.

The proposed site plan shall show in scale the property lines of the entire parcel of land for which site plan approval is sought and indicate the dimensions of said property.

The proposed site plan shall include the name of the applicant, the date the proposed site plan was prepared, a north arrow, the scale to which the proposed site plan is drawn, the name of the person who prepared the site plan, the block and lot number of the lands for which site plan approval is sought as shown on the most current tax assessment maps of the Borough of Englewood Cliffs and the names of all streets abutting such lot and block.

The proposed site plan shall include the names of all owners of adjacent property, together with block and lot numbers of such property.

The site plan shall show the zoning district in which the parcel is located together with zone boundaries within 100 feet therefrom.

The location of all existing and proposed buildings and structures on the lands for which site plan approval is sought together with the distances of said buildings and structures from the property lines of said lands and from each other.

The right-of-way and pavement widths of all public streets upon which the lands for which the site plan approval is sought fronts to a distance of 100 feet beyond such lands. State highway and County road requirements shall be adhered to in all cases.

A statement by the owner of whether any property adjoining the lands for which site plan approval is sought is or is not owned by said owner.

The locations and dimensions of all existing and proposed driveways, curb cuts, private access roads, curbing, parking areas, parking stalls, loading areas and loading bays, locations of all existing driveways within 200 feet of the lot.

The proposed landscaping, screening and exterior lighting; including the location, number, size and type of existing landscaping and trees to remain; the location, number, size and type of trees, shrubs and landscaping to be installed; the locations, type, height, intensity and illumination area of any lighting to be installed.

Arrows which indicate the direction of traffic on all driveways, interior drives and parking areas.

Existing and proposed drainage facilities.

Existing and proposed contour lines at two-foot intervals.

The proposed use or uses of land and buildings together with floor space of all buildings and the estimated number of employees. If the precise use of the building is unknown at the time of application, an amended plan showing the proposed use shall be required prior to issuance of a certificate of occupancy.

The site plan shall show the location and design of any off-street parking areas or loading areas showing size and location of bays, aisles and barriers.

The site plan shall show the location and type of garbage and refuse disposal facilities, including maneuvering areas.

Where applicable, the site plan shall show the location and treatment of open space.

Existing and proposed elevation of buildings and curbs.

The location of any dumpsters or any other garbage or trash receptacles shall be clearly shown along with required fencing and screening.

For proposals for the construction of 25 or more units of single-family housing and any commercial or industrial development proposal of 1,000 square feet of land or more, the site plan shall show storage areas for the required recyclable materials along with screening and description of containers for recyclable material.

Where applicable, the following information shall be provided:

Such other data or information that reasonably may be necessary for the Planning Board to meet the objectives of site plan and subdivision approval in acting on a particular application.

Drawings submitted in support of an application for site plan approval shall be signed and sealed by a licensed professional (architect, engineer or planner).

When the application is approved and the drawings are signed by the Chairman of the Planning Board, the applicant shall submit the following for Planning Board use:

At the completion of construction for all approved applications the applicant shall submit to the Planning Board as-built drawings showing all subsurface utilities and the layout of parking stalls; and the location and elevation of all utilities. Locations shall be shown by means of off-sets to roadway centerlines or baselines.

Dimensions on as-built drawings shall be shown for all parking stalls and aisles. The drawings shall be certified by the Board Engineer. Prior to the time the Construction Official issues a certificate of occupancy, the Construction Official shall obtain from the Planning Board Engineer certification that all of the requirements of granting Planning Board approval have been satisfied.

Such other data or information that reasonably may be necessary for the Planning Board to meet the objectives of site plan approval in acting on a particular application.