search icon

Point Pleasant Beach
City Zoning Code

§ 19-14.8

Final Plat Details.

a. 
Subdivision plat details. The final plat shall be prepared at a scale of not less than one inch equals 50 feet in accordance with the New Jersey Map Filing Law (N.J.S.A. 46:23-9.9 to 23-9.16) and contain the following information:
1. 
Date of submission, name and location of the subdivision, and the name of the owner;
2. 
Graphic scale and reference meridian; at least one corner of the subdivision shall be tied to New Jersey Plane Coordinate Data with a description on the plat as to how the bearings were determined, provided a grid coordinate control point is situated within one mile distance from the proposed subdivision;
3. 
Tract boundary lines, street rights-of-way lines, street names, easements (and other rights-of-way), land to be dedicated to public use, lot lines and other site lines, bearings or deflection angles and radii, arcs and center angles of all curves;
4. 
Designation of the purpose of any easement of land set aside for public use, and a notation of proposed use on any nonresidential sites;
5. 
Zoning boundaries and the zoning designation of all adjacent lands;
6. 
Block and lot numbers in conformity with existing tax map procedures;
7. 
Minimum building setback lines as specified in the development ordinance.
8. 
Location and description of monuments set and monuments to be set;
9. 
The final plat shall be accompanied by the following documents:
(a) 
Certification from the tax collector that all taxes, municipal assessments and penalties are paid to date;
(b) 
Certification that the applicant is the owner of the land or his properly authorized agent, or that the owner has given consent under an option agreement;
(c) 
Cross-section and profile drawings of streets as approved by the Borough Engineer; and
(d) 
Plans and profiles of storm and sanitary sewers and water mains as approved by the Borough Engineer.
b. 
Site plan details.
1. 
All details stipulated in Subsection 19-14.6b above shall be included.
2. 
All additional details required at the time of preliminary approval shall be submitted.
3. 
Detailed architectural and engineering data including:
(a) 
An architect's rendering of each building or a typical building and sign, showing front, side and rear elevations.
(b) 
Cross sections of streets, aisles, lanes and driveways, which shall adhere to applicable requirements of this chapter.