Curbs, gutters and catch basins shall be adequate to handle the maximum water runoff from tributary lands.

Concrete curbs and gutters shall be constructed in accordance with New Jersey State Highway Specifications for Curbs and Gutters, as amended or as modified by Borough Engineering standards.

The concrete to be used for curbs and gutters shall be class B concrete as specified in the New Jersey Highway Specifications for Curbs and Gutters.

The curb shall be laid in a workmanlike manner as directed and approved by the Borough Engineer.

The curb at all delivery openings shall be depressed at the front of the curb to a point 1 1/2 inches above the finished pavement.

The rear top corner of this curb shall have a radius of 1/4 inch, and the front top corner shall have a radius of 1 1/2 inches.

Curb openings shall be in such width as shall be determined by the Borough Engineer but in no case more than 16 feet at the edge of the pavement.

Curb inlets will be required to meet the Phase II municipal stormwater requirements.

No single- or two family residences shall be permitted to have more than a single curb cut. All curb cut/driveway entrances constructed in the residential zones of the Borough, as designated by the zoning ordinance, shall be not less than 10 feet and not more than 13 feet in width for a one-car garage, and not less than 13 feet and not more than 16 feet in width for a two- or more car garage.

The provisions of Subsection 19-15.4 pertaining to curbs shall apply to and affect this subsection.