Corner lots.
Platted corner lots shall observe the minimum front yard setback requirements on one street side. A ten foot minimum setback shall be required on the second street side.

Two single-family dwellings may be permitted on corner lots when the following criteria are met:
A.
Location. On lots platted prior to 1947 that are at least 50 feet wide by 140 feet deep.
B.
Special Requirements. Requirement number 3 shall have no effect on corner lots containing two existing single-family homes prior to June 16, 1975. Other listed requirements shall have no effect on corner lots containing two existing single-family homes prior to April 16, 1979, provided no conditional use permit has been granted containing any of the requirements. In instances where a conditional use permit has been granted, conditions of the permit shall be adhered to.
Requirements for a corner lot split include but are not limited to the following:
1.
Two off street parking spaces shall be provided for each lot.
2.
Curb, gutter and sidewalk shall be provided in accordance with Nampa Engineering Policies and Construction Standards.
3.
The smallest parcel shall be at least 65 feet long.
4.
Utility services shall be located in recorded easements on private property.
5.
A record of survey and deeds for the lot split shall be recorded prior to the application of a building permit for the new home.
6.
Construction shall comply with plans submitted, approved and on file with the building division.
7.
The building official shall not issue a certificate of occupancy until the engineering, planning and zoning and building divisions are satisfied that all the stated requirements have been complied with. A certificate of occupancy may be issued upon receipt of a bond in the amount of 150 percent of the value of incomplete improvements as approved by the director or his/her designee.
8.
An application for a building permit shall include a plot plan showing existing conditions and proposed improvements at a scale of at least one inch to 20 feet.
(Ord. No. 4617, § 1(Exh. A), 10-4-2021; Ord. No. 4843, § 18, 2-3-2025)