Zoneomics Logo
search icon

Smithfield City Zoning Code

17.96 MANUFACTURED

HOUSE

17.96.010 REQUIREMENTS

The requirements of this chapter shall not prevent the placement of a single-family dwelling on an individual lot, as defined in SMC 17.04.060 of this title, provided the following conditions are satisfied:

  1. Architectural compatibility with site built housing and building code standards.
    1. Shingled pitched roof with eaves,
    2. Conventional exterior siding which extends to a permanent continuous foundation of concrete or masonry with access hole. No seamless metal shells,
    3. Has permanent entrances and exits (porches and steps) which are installed according to the adopted building codes,
    4. Stamped approval by HUD (S-5402-6),
    5. Consist of two (2) or more modules not less than twenty four feet (24') total width,
    6. The minimum square footage to be not less than one thousand (1,000) square feet or the average of square footage of adjacent homes;
  2. The necessary building permits are obtained to assure that site preparation, foundations, installation, roof loads, etc. meet the appropriate codes;
  3. Meets the waste disposal requirements of the city, county and state board of health;
  4. Does not violate any deed restrictions or covenants in the area where the unit is to be located;
  5. The manufactured home is recorded with the county recorder as being permanently affixed to real estate;
  6. Meets side, rear and front yard requirements in residential zones in which they are permitted;
  7. The manufactured house will be placed, installed and anchored according to installation codes adopted by Smithfield City or county building official and shall be inspected after the manufactured home has been installed and permanently anchored.

HISTORY
Adopted by Ord. 15-20 on 11/11/2015

15-20