Belleville City Zoning Code
§ 23-7.19
Streetscape Requirements for the B-G and B-A Districts.
[Added 4-12-2022 by Ord. No. 3644]
a.
All development within the B-G and B-A Districts requiring Site Plan approval shall be required to incorporate and construct the standard street scape improvements along all street frontages of the project site. The following improvements are required and shall be included in the plans submitted to the Township. This design plan supersedes any other special district street scape plan; such as, the Silver Lake Street Scape Standards. For example, if a B-A Zone is within the Silver Lake Design District, this streetscape design shall be applied.
1.
Sidewalk Design: The Sidewalk shall be improved with a four foot wide paver strip. Required design details are contained in Figure 1 below.
Township Standard Paver D Figure 1 |
Belgium 5-pc. design kit |
Sizes: 5 x 8 1/2, 5 x 7 1/2, 5 x 6 1/2, 5 x 6, 5 x 5 |
(All Pavers 2.375" thk) |
Color: Coal |
As Mfg by Cambridge Pavers |
www.cambridgepavers.com |
(Note: This paver is to match paver selected by the Township Engineer for Washington Ave Streetscape Improvements) |
2.
Paver border: Between curb and sidewalk.
3.
Paver pattern: Running bond perpendicular to curb. If the road or street curves, the paver placement remains perpendicular to the curb (see Figure 2).
4.
Concrete sidewalk: Between paver line and R-O-W line.
5.
Concrete color: Natural Portland cement.
6.
Concrete finish: Wood float with 3/8 inch saw cut joints every five feet-zero inch and 1/3 slab depth
7.
Tree pits: Trapezoid shape spaced every 35 feet on-center.
 Figure 2 |