Compton City Zoning Code

§ 30-13.4

Property Development Standards C-M.

[Added by Ord. #1557, § 9132.4; Ord. #1733, § 1; Ord. #1941, §§ 4, 5; Ord. #2025, § 1; Ord. #2102, § 8; Ord. #2155, § 3]

The following property development standards shall apply to all land and buildings in the Commercial Manufacturing Zone (C-M):

Lot Area and Width. (For exceptions see subsection 30-20.2). Each lot or parcel of land shall have a minimum area of 10,000 square feet and a minimum width of 70 feet.

Lot Coverage and Building Height. (For exceptions see subsection 30-20.4 of this Chapter) as follows:

Building lot coverage shall be limited to 40% of the lot or parcel of land.

Building height shall be limited to 75 feet above grade (exclusive of roof structures housing building operating equipment).

Yards. (For exceptions, see subsection 30-20.3 of this Chapter).

Front Yards. There shall be a front yard of not less than 10 feet.

Side Yards. No side yard shall be required, except where a side lot line abuts a street and/or residential zone there shall be a side yard of not less than 10 feet.

Rear Yards. No rear yard shall be required, except where a rear lot line abuts a street and/or residential zone there shall be a rear yard of not less than 10 feet.

Within 200 feet of a residential zone all new buildings, including additions, designed for occupancy by manufacturing uses shall require a conditional use permit pursuant to the provisions of Section 30-26 of this Chapter.

Fences and Walls. The provisions of Section 30-44 of this Chapter shall apply.

Special Development Standards: Outside Storage and Display.

All uses, storage, and display shall be located entirely within a building (for exceptions see subsection 30-26.6 of this Chapter).

Special Development Standards: Tenant Mix Leasing Plan. A Tenant Mix Leasing Plan shall be approved by the City prior to issuance of building permits on existing structures reconfigured with three or more commercial tenant spaces or the granting of any discretionary permit approving any commercial or mixed-use project, including housing and commercial or manufacturing uses, which contain three or more commercial tenant spaces. The Tenant Mix Leasing Plan shall be reviewed and approved by the Planning Director or his/her designee. When submitted concurrently with an application for a discretionary permit, Planning Commission shall approve the Plan.

Compton City Zoning Code

§ 30-13.4

Property Development Standards C-M.

[Added by Ord. #1557, § 9132.4; Ord. #1733, § 1; Ord. #1941, §§ 4, 5; Ord. #2025, § 1; Ord. #2102, § 8; Ord. #2155, § 3]

The following property development standards shall apply to all land and buildings in the Commercial Manufacturing Zone (C-M):

Lot Area and Width. (For exceptions see subsection 30-20.2). Each lot or parcel of land shall have a minimum area of 10,000 square feet and a minimum width of 70 feet.

Lot Coverage and Building Height. (For exceptions see subsection 30-20.4 of this Chapter) as follows:

Building lot coverage shall be limited to 40% of the lot or parcel of land.

Building height shall be limited to 75 feet above grade (exclusive of roof structures housing building operating equipment).

Yards. (For exceptions, see subsection 30-20.3 of this Chapter).

Front Yards. There shall be a front yard of not less than 10 feet.

Side Yards. No side yard shall be required, except where a side lot line abuts a street and/or residential zone there shall be a side yard of not less than 10 feet.

Rear Yards. No rear yard shall be required, except where a rear lot line abuts a street and/or residential zone there shall be a rear yard of not less than 10 feet.

Within 200 feet of a residential zone all new buildings, including additions, designed for occupancy by manufacturing uses shall require a conditional use permit pursuant to the provisions of Section 30-26 of this Chapter.

Fences and Walls. The provisions of Section 30-44 of this Chapter shall apply.

Special Development Standards: Outside Storage and Display.

All uses, storage, and display shall be located entirely within a building (for exceptions see subsection 30-26.6 of this Chapter).

Special Development Standards: Tenant Mix Leasing Plan. A Tenant Mix Leasing Plan shall be approved by the City prior to issuance of building permits on existing structures reconfigured with three or more commercial tenant spaces or the granting of any discretionary permit approving any commercial or mixed-use project, including housing and commercial or manufacturing uses, which contain three or more commercial tenant spaces. The Tenant Mix Leasing Plan shall be reviewed and approved by the Planning Director or his/her designee. When submitted concurrently with an application for a discretionary permit, Planning Commission shall approve the Plan.