Lakehurst City Zoning Code
§ 25-19.5
Final Map.
[Ord. No. 11/78; Ord. No. 5/24/82 § 1004]
a.
The final map for final subdivision approval shall provide the following information and data as a minimum:
1.
Clearly and legibly drawn.
2.
Graphic scale not less than one inch equals 50 feet.
3.
Drawn in compliance with Map Filing Law.
4.
Sheet sizes of 30 inches by 42 inches; 24 inches by 36 inches; 15 inches by 21 inches; or 8 1/2 inches by 13 inches. If more than one sheet is required to show the entire subdivision, a separate composite map at a reduced size shall be drawn on one sheet showing the entire subdivision and the sheets on which the various sections are shown.
5.
Date of original drawing.
6.
Date of all revisions.
7.
Name of subdivision.
8.
Municipality, County, State.
9.
Tract boundary lines, all lot lines, other site lines.
10.
Right-of-way lines of streets, street names, right-of-way widths.
11.
Easements and other right-of-ways, dimensions and purpose.
12.
Lands reserved or dedicated to public use, and their purpose.
13.
Accurate dimensions, bearings or deflection angles, radii, arcs, tangents, central angles of all curves, distances to street intersections of all tract lines.
14.
Consecutive numbering from the tax assessor of each block and lot.
15.
Minimum building setback line on all lots and other sites.
16.
Location and description of all monuments, existing or to be set in place.
17.
Name of owner of any adjoining land.
18.
Certification of accuracy of plat details by a licensed Land Surveyor.
19.
Certification that the applicant is the owner or agent of the land, or that the owner has given consent to subdivide.
20.
Certification of approval by the Planning Board Engineer.