Lakehurst City Zoning Code
§ 25-19.6
Final Design Plan.
[Ord. No. 11/78; Ord. No. 5/24/82 § 1005]
Final design plan approval by the Planning Board Engineer is required prior to the issuance of building permits and the commencement of any site improvements and shall contain as a minimum the information described below. The final design plan shall be a separate drawing(s), shall be based upon the preliminary plans, and shall be appropriately titled.
Final design plans shall include all details of all improvements required pursuant to this chapter, unless specifically waived by the Planning Board at the time of preliminary approval.
a.
The final design plan shall show in final form all information required for preliminary approval in subsection 25-19.4 above and the following additional information:
1.
Proposed elevations shown at building corners and finished first floor.
2.
Typical construction details showing cross-sectioned details of manholes, inlets, pavement, curbs, sidewalks, drainage channels, headwalls, etc.
3.
Typical street cross-sections shall indicate the type and width of pavement and the location of curbs, sidewalks, typical underground utilities, and shade tree planting. At intersections, the sight triangles, radii of curblines, crosswalks and street sign locations shall be shown.
4.
Final plans, center-line profiles, final grades of all proposed and existing streets in the tract and within 200 feet of the subdivision, together with full information as to the disposal of surface drainage, including final plans, and profiles of all on-site and off-site storm drainage improvements.