Craft industries are defined as manufacture or assembly as defined in SIC Major Group 39, Miscellaneous Manufacturing Industries, when developed to the standards of this section. (5/98)

The following special use standards must be met: (5/98)

A.

The portion of the site used for manufacturing or assembly shall not exceed 5,000 square feet in floor area in an MU or CM zone or 10,000 square feet in a CG zone. (5/98)

B.

In an MU or CM zone, the use shall have a retail storefront. (5/98)

C.

The use shall have no outside space used for manufacturing or assembly, storage of raw materials used in the manufacturing or assembly process, or staging of materials being either shipped in or out. (5/98)

D.

There shall be no outside loading dock. (5/98)

E.

No noise, odor, light, or vibration will emanate outside the walls of the building used for the manufacturing or assembly. (5/98)

F.

Development prohibitions. (5/98)

1.

Manufacturing and assembly operations requiring permits from the department of environmental quality (DEQ) for air or water discharge or similar environmental concerns shall be prohibited. (5/98)

2.

Primary processing of raw materials shall be prohibited. (5/98)